ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(0) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(0) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(8)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(0) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(16)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(24)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(32)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(40)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(48)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(56)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(80)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(90)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(100)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(110)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(120)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(130)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(140)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(8)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(1)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(16)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(1)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(24)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(32)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(40)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(48)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=int(0)

(Count[InGo]['jc'][key])=正常

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(56)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(80)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(90)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(50) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) }

●[key]=int(100)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(51) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) [100]=> int(1) }

●[key]=int(110)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(51) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) [100]=> int(1) }

●[key]=int(120)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(52) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) [100]=> int(1) [120]=> int(1) }

●[key]=int(130)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

ここから変数出力確認のためのコード-------------------------------------------------------------------------------------------

●(Count[InGo][jc])=array(52) { [0]=> int(0) [1]=> int(0) [2]=> int(0) [3]=> int(0) [4]=> int(0) [5]=> int(0) [6]=> int(0) [7]=> int(0) [8]=> int(1) [9]=> int(0) [10]=> int(0) [11]=> int(0) [12]=> int(0) [13]=> int(0) [14]=> int(0) [15]=> int(0) [16]=> int(1) [17]=> int(0) [18]=> int(0) [19]=> int(0) [20]=> int(0) [21]=> int(0) [22]=> int(0) [23]=> int(0) [24]=> int(0) [25]=> int(0) [26]=> int(0) [27]=> int(0) [28]=> int(0) [29]=> int(0) [30]=> int(0) [31]=> int(0) [32]=> int(0) [33]=> int(0) [34]=> int(0) [35]=> int(0) [36]=> int(0) [37]=> int(0) [38]=> int(0) [39]=> int(0) [40]=> int(0) [41]=> int(0) [42]=> int(0) [43]=> int(0) [44]=> int(0) [45]=> int(0) [46]=> int(0) [47]=> int(0) [48]=> int(0) [49]=> int(0) [100]=> int(1) [120]=> int(1) }

●[key]=int(140)

(is_numeric(key))=正常

(Count[InGo]['jc'][key])=エラー

ここまで変数出力確認の為のコード===========================================================================================

Warning: Undefined variable $KeepDataSrec in /home/bokeno/jw-step.net/public_html/step_header.php on line 37

沖縄 20～30代就職・転職 ジェイウォームステップ > 沖縄県内

おためし勤務の求人情報[沖縄県内]

現在の検索条件

[沖縄県内]
Warning: Undefined array key "in" in /home/bokeno/jw-step.net/public_html/step_item.php on line 1602
[おためし勤務]

条件：おためし転職とは？

・1日～1ヶ月程度のお試し勤務OK

Warning: Undefined array key "list" in /home/bokeno/jw-step.net/public_html/step_item.php on line 1841

全2件ヒット(1～2件表示)

おすすめ順新着順20件ずつ30件ずつ40件ずつ

那覇市掲載:1/10～1/23

正社員求人広告の営業事務（那覇市字銘苅）【浦添年金事務所近く／育休実績有】

初めての仕事探し

社会人経験３年未満の転職

おためし勤務

冒険王　株式会社

接客が好き! 話を聞くのが好き!　テキパキと仕事を進めたい方に　ピッタリのお仕事！

仕事内容企業や店舗の採用担当者向けに、求人広告の案内・作成・フォローを実施。Web・誌面の媒体特性を活かし、募集内容に合わせて対応します。外出はほぼありません[具体的には]・求人広告掲載の電話ご案内・顧客へ掲載案内・求人広告内容の電話確認・提案・メール・FAXで広告の確認・伝票作成(数量・売上データ入力)・掲載企業へ応募状況確認・提案他、受電や配属チーム外勤とパートナーとして業務を進める場合もあります。

• 

  月給206,463～218,913円 （みなし残業月5h/7,463～7,913円含む） ※残業5h以上は別途超過分も支給 ※残業5h以内もみなし残業支給 ※試用3～6ヶ月間（月給206,463円）

• 

  8:45～17:45 ※残業ほとんど無し（5h以内/月）

• 

  ＼年間休日115日／ 週休2日(土・日)、祝日 GW、年末年始 ※年2回土曜出勤有 （全体会議や決算報告会など通常業務以外を行います）

• 

  那覇市銘苅 [周辺環境] ・徒歩圏内にコンビニ・郵便局あり [アクセス] ・パイプライン古島交差点から北向け車で約3分 ・内間バス停から徒歩1分 ・モノレール古島駅から徒歩約10分

Warning: Undefined variable $KeepDataArray in /home/bokeno/jw-step.net/public_html/step_list_content_ver240802.php on line 622

詳細を見る

☆キープ

問合せ

本日掲載終了！

> 冒険王　株式会社に関連する求人を見る

複数地域(沖縄県内)掲載:1/17～1/23

正社員水道・配管工スタッフ【未経験歓迎／残業ほぼ無し】

初めての仕事探し

ステップアップの転職

おためし勤務

有限会社　ゆいまーる水道

未経験でも歓迎♪　20代～のスタッフが活躍！フォロー体制有

仕事内容1日に2～3件程度、一般家庭での水道・配管のメンテナンスを行います。

• 

  月給210,000円～ ※固定残業代37,365円/24h分含む 　(超過分は別途支給) ※試用期間3ヶ月/月給180,000円～ --- ※経験・能力により優遇

• 

  9:00～18:00(基本残業なし) ※平均残業時間0～5h以内/月

• 

  月6日程度(※シフト制)

• 

  県内全域

Warning: Undefined variable $KeepDataArray in /home/bokeno/jw-step.net/public_html/step_list_content_ver240802.php on line 622

詳細を見る

☆キープ

問合せ

本日掲載終了！

> 有限会社　ゆいまーる水道に関連する求人を見る

全2件ヒット(1～2件表示)

Warning: Undefined variable $Device in /home/bokeno/jw-step.net/public_html/step_item.php on line 1928

Warning: Undefined variable $Device in /home/bokeno/jw-step.net/public_html/step_item.php on line 1928

Warning: Undefined variable $Device in /home/bokeno/jw-step.net/public_html/step_item.php on line 1928